1. dargludedd thermol uchel copr pur neu isel-aloi stribed ar gyfer cyfnewidydd gwres
Gradd: T2, TP1, TP2, TU1, TU2, CuSn0.15 ac ati.
| Gradd | GB | ISO | ASTM | EN | JIS |
| Copr pur | T2 | Cu-FRHC | C11000 | CW004A | C1100 |
| Copr di-ocsigen | TU1 | / | C10200 | C103 | C1011 |
| TU2 | Cu-OF | C10200 | C103 | C1020 | |
| Copr ffosfforedig | TP1 | Cu-DLP | C12000 | / | C1201 |
| TP2 | Cu-DHP | C12200 | CW024A | C1220 | |
| Tellurium copr | TSn0.12 | CuSn0.15 | C14415 | CW117C | C1441 |
Nodweddion perfformiad: Dargludedd thermol uchel, dargludedd trydanol uchel, perfformiad prosesu da, hydwythedd, lluniadu dwfn, ymwrthedd cyrydiad da
Manylebau:
Trwch: 0.005-5mm
Lled: 4-1000mm
Goddefgarwch (mm)
| Trwch | Lled | |||||
| ＜300 | ＜600 | 1000 | ＜400 | ＜600 | ＜1000 | |
| Goddefgarwch trwch± | Goddefgarwch lled± | |||||
| 0.05-0.1 | 0.005 | --- | --- | 0.2 | --- | --- |
| 0.1-0.3 | 0.008 | 0.015 | --- | 0.3 | 0.4 | --- |
| 0.3-0.5 | 0.015 | 0.020 | --- | 0.3 | 0.5 | --- |
| 0.5-0.8 | 0.020 | 0.030 | 0.060 | 0.3 | 0.5 | 0.8 |
| 0.8-1.2 | 0.030 | 0. 040 | 0.080 | 0.4 | 0.6 | 0.8 |
| 1.2-2.0 | 0. 040 | 0. 045 | 0.100 | 0.4 | 0.6 | 0.8 |
| 2.0-3.0 | 0. 045 | 0.050 | 0. 120 | 0.5 | 0.6 | 0.8 |
| Uchod 3.0 | 0.050 | 0.12 | 0.15 | 0.6 | 0.8 | 1.0 |
Cais: a ddefnyddir yn eang fel asgell neu danc mewn cyflyrydd aer, gwresogydd a meysydd trydanol.
Systemau dŵr thermol solar ； Systemau HVAC ； Gwresogyddion dŵr nwy ； Gwresogi ac oeri aer gorfodol ； Systemau electronig ac ati.
| Gradd aloi | Tymher | Cryfder tynnol (N/mm²) | Elongation % | Caledwch | Dargludedd IACS | Dargludedd thermol W/(mK) | |||||||||||||||
| GB | JIS | ASTM | EN | GB | JIS | ASTM | EN | GB | JIS | ASTM | EN | GB | JIS | ASTM | EN | GB （HV） | JIS(HV) | ASTM(HR) | EN |
| |
| T2 | C1100 | C11000 | Cu-FRHC | M | O | O61 | R200/H040 | ≥195 | ≥195 | ≤235 | 200-250 | ≥30 | ≥30 |
|
| ≤70 |
|
| 40-65 | 97 | 388 |
| Y4 | 1/4H | H01 | R220/H040 | 215-275 | 215-285 | 235-290 | 220-260 | ≥25 | ≥20 |
| ≥33 | 60-90 | 55-100 | 18-51 | 40-65 | ||||||
| Y2 | 1/2H | H02 | R240/H065 | 245-345 | 235-315 | 255-315 | 240-300 | ≥8 | ≥10 |
| ≥8 | 80-110 | 75-120 | 43-57 | 65-95 | ||||||
| Y | H | / | R290/H090 | 295-380 | ≥275 | / | 290-360 | ≥3 |
| ≥4 | 90-120 | ≥80 |
| 90-110 | |||||||
| T | / | R360/H110 | ≥350 | / | ≥360 |
|
|
| ≥2 | ≥110 |
| ≥110 | |||||||||
| TU1 | C1020 | C10200 | CU-0F | M | O | H00 | R200/H040 | ≥195 | ≥195 | 200-275 | 200-250 | ≥30 | ≥30 |
|
| ≤70 |
|
| 40-65 | 101 | 391 |
| Y4 | 1/4H | H01 | R220/H040 | 215-275 | 215-285 | 235-295 | 220-260 | ≥25 | ≥15 |
| ≥33 | 60-90 | 55-100 |
| 40-65 | ||||||
| Y2 | 1/2H | H02 | R240/H065 | 245-345 | 235-315 | 255-315 | 240-300 | ≥8 | ≥10 |
| ≥8 | 80-110 | 75-120 |
| 65-95 | ||||||
| H | H03 | R290/H090 | ≥275 | 285-345 | 290-360 |
|
| ≥8 | ≥80 |
| 90-110 | ||||||||||
| Y | H04 | 295-380 | 295-360 | ≥3 |
|
| 90-120 |
| |||||||||||||
| H06 | R360/H110 | 325-385 | ≥360 |
|
| ≥2 |
| ≥110 | |||||||||||||
| T | H08 | ≥350 | 345-400 |
|
|
| ≥110 |
| |||||||||||||
| H10 | ≥360 |
|
|
| |||||||||||||||||
| TU2 | C1020 | C10200 | CU-0F | M | O | H00 | R200/H040 | ≥195 | ≥195 | 200-275 | 200-250 | ≥30 | ≥30 |
|
| ≤70 |
|
| 40-65 | 98 | 385 |
| Y4 | 1/4H | H01 | R220/H040 | 215-275 | 215-285 | 235-295 | 220-260 | ≥25 | ≥15 |
| ≥33 | 60-90 | 55-100 |
| 40-65 | ||||||
| Y2 | 1/2H | H02 | R240/H065 | 245-345 | 235-315 | 255-315 | 240-300 | ≥8 | ≥10 |
| ≥8 | 80-110 | 80-100 |
| 65-95 | ||||||
| H | H03 | R290/H090 | ≥275 | 285-345 | 290-360 |
|
| ≥8 | ≥80 |
| 90-110 | ||||||||||
| Y | H04 | 295-380 | 295-360 | ≥3 |
|
| 90-120 |
| |||||||||||||
| H06 | R360/H110 | 325-385 | ≥360 |
|
| ≥2 |
| ≥110 | |||||||||||||
| T | H08 | ≥350 | 345-400 |
|
|
| ≥110 |
| |||||||||||||
| H10 | ≥360 |
|
|
| |||||||||||||||||
| TP1 | C1201 | C12000 | CU-DLP | M | O | H00 | R200/H040 | ≥195 | ≥195 | 200-275 | 200-250 | ≥30 | ≥30 |
|
| ≤70 |
|
| 40-65 | 90 | 350 |
| Y4 | 1/4H | H01 | R220/H040 | 215-275 | 215-285 | 235-295 | 220-260 | ≥25 | ≥15 |
| ≥33 | 60-90 | 55-100 |
| 40-65 | ||||||
| Y2 | 1/2H | H02 | R240/H065 | 245-345 | 235-315 | 255-315 | 240-300 | ≥8 | ≥10 |
| ≥8 | 80-110 | 75-120 |
| 65-95 | ||||||
| H | H03 | R290/H090 | ≥275 | 285-345 | 290-360 |
|
| ≥8 | ≥80 |
| 90-110 | ||||||||||
| Y | H04 | 295-380 | 295-360 | ≥3 |
|
| 90-120 |
| |||||||||||||
| H06 | R360/H110 | 325-385 | ≥360 |
|
| ≥2 |
| ≥110 | |||||||||||||
| T | H08 | ≥350 | 345-400 |
|
|
| ≥110 |
| |||||||||||||
| H10 | ≥360 |
|
|
|
| ||||||||||||||||
| TP2 | C1220 | C12200 | CU-DHP | M | O | H00 | R200/H040 | ≥195 | ≥195 | 200-275 | 200-250 | ≥30 | ≥30 |
|
| ≤70 |
|
| 40-65 | 70-90 | 340 |
| Y4 | 1/4H | H01 | R220/H040 | 215-275 | 215-285 | 235-295 | 220-260 | ≥25 | ≥15 |
| ≥33 | 60-90 | 55-100 |
| 40-65 | ||||||
| Y2 | 1/2H | H02 | R240/H065 | 245-345 | 235-315 | 255-315 | 240-300 | ≥8 | ≥10 |
| ≥8 | 80-110 | 75-120 |
| 65-95 | ||||||
| H | H03 | R290/H090 | ≥275 | 285-345 | 290-360 |
|
| ≥8 | ≥80 |
| 90-110 | ||||||||||
| Y | H04 | 295-380 | 295-360 | ≥3 |
|
| 90-120 |
| |||||||||||||
| H06 | R360/H110 | 325-385 | ≥360 |
|
| ≥2 |
| ≥110 | |||||||||||||
| T | H08 | ≥350 | 345-400 |
|
|
| ≥110 |
| |||||||||||||
| H10 | ≥360 |
|
|
|
| ||||||||||||||||
2. ymwrthedd cyrydiad uchel stribed copr nicel CuNi10/19/30 ar gyfer cyfnewidydd gwres ac oerach
Gradd: CuNi10, CuNi19/20, CuNi30 ac ati.
| Deunydd | GB | ISO | ASTM | EN | JIS |
| Aloi copr nicel | b10 | CuNi10 | C70600 | CN102 | C7060 |
| B19/20 | CuNi19 | C71000 | CN104 | C7100 | |
| B30 | CuNi30 | C71600 | CN107 | C7160 |
Nodweddion perfformiad: Priodweddau prosesu da, ymwrthedd cyrydiad, tymheredd uchel a gwrthiant dŵr pwysedd uchel
Manylebau
Trwch: 0.15-1.2mm
Lled: 10-300mm
Goddefgarwch (mm)
| Trwch | Lled | |||
| ＜300 | ＜600 | ＜400 | ＜600 | |
| Goddefgarwch trwch ± | Goddefgarwch lled± | |||
| 0.1-0.3 | 0.008 | 0.015 | 0.3 | 0.4 |
| 0.3-0.5 | 0.015 | 0.020 | 0.3 | 0.5 |
| 0.5-0.8 | 0.020 | 0.030 | 0.3 | 0.5 |
| 0.8-1.2 | 0.030 | 0. 040 | 0.4 | 0.6 |
Cais: Defnyddir yn helaeth mewn gweithfeydd pŵer, diwydiant dihalwyno, peirianneg forol, diwydiant petrocemegol.
| Gradd aloi | Tymher | Cryfder tynnol (N/mm²) | Elongation % | Caledwch | |||||||||||||||
| GB | JIS | ASTM | EN | GB | JIS | ASTM | EN | GB | JIS | ASTM | EN | GB | JIS | ASTM | EN | GB （HV） | JIS(HV) | ASTM(HR) | EN |
| b10 |
| C70690 | CuNi10 |
|
|
|
|
|
| ≥290 | ≥350 |
|
| ≥35 | ≥25 |
|
|
|
|
| b19 |
| C71000 | CuNi19 |
|
|
|
| ≥275 |
| 338-655 | ≥310 | ≥25 |
| 11-40 | 35-38 |
|
|
|
|
| B30 |
| C71520 | CuNi30 |
|
| M20 |
|
|
| 310-450 |
|
|
| ≥30 |
|
|
|
|
|
| H01 | 400-495 | ≥20 | 67-81 | ||||||||||||||||
| H02 | 455-550 | ≥10 | 76-85 | ||||||||||||||||
| H04 | 515-605 | ≥7 | 83-89 | ||||||||||||||||
| H06 | 550-635 | ≥5 | 85-91 | ||||||||||||||||
| H08 | 580-650 |
| 87-91 | ||||||||||||||||
3. Stribed aloi pres admiralty ar gyfer tanc cyfnewidydd gwres a gwresogyddion
Gradd: CuZn30/33/36 ac ati.
| Deunydd | GB | ISO | ASTM | EN | JIS |
|
Pres | H70 | CuZn30 | C26000 | CW505L | C2600 |
| H68 | CuZn33 | C26800 | CW506L | C2680 | |
| H65 | CuZn36 | C27000 | CW507L | C2700 |
Nodweddion perfformiad: Priodweddau mecanyddol da; darbodus
Manylebau:
Trwch: 0.05-5mm
Lled: ≤600mm neu ≤1000mm (T≥0.5mm)
Goddefgarwch (mm)
| Trwch | Lled | |||||
| ＜300 | ＜600 | 1000 | ＜400 | ＜600 | ＜1000 | |
| Goddefgarwch trwch± | Goddefgarwch lled± | |||||
| 0.05-0.1 | 0.005 | --- | --- | 0.2 | --- | --- |
| 0.1-0.3 | 0.008 | 0.015 | --- | 0.3 | 0.4 | --- |
| 0.3-0.5 | 0.015 | 0.020 | --- | 0.3 | 0.5 | --- |
| 0.5-0.8 | 0.020 | 0.030 | 0.060 | 0.3 | 0.5 | 0.8 |
| 0.8-1.2 | 0.030 | 0. 040 | 0.080 | 0.4 | 0.6 | 0.8 |
| 1.2-2.0 | 0. 040 | 0. 045 | 0.100 | 0.4 | 0.6 | 0.8 |
| 2.0-3.0 | 0. 045 | 0.050 | 0. 120 | 0.5 | 0.6 | 0.8 |
| Uchod 3.0 | 0.050 | 0.12 | 0.15 | 0.6 | 0.8 | 1.0 |
Cais: tanc a phenawdau oerach, anweddydd mewn diwydiant morol.
| Gradd aloi | Tymher | Cryfder tynnol (N/mm²) | Elongation % | Caledwch | |||||||||||||||
| GB | JIS | ASTM | EN | GB | JIS | ASTM | EN | GB | JIS | ASTM | EN | GB | JIS | ASTM | EN | GB （HV） | JIS(HV) | ASTM(HR) | EN |
| H70 | C2600 | C26000 | CUZn30 | M | O | M02 | R270/H055 | ≥290 |
| 285-350 | 270-350 | ≥40 |
|
| ≥40 | ≤90 |
|
| 55-90 |
| Y4 | 1/4H | H01 | R350/H095 | 325-410 |
| 340-405 | 350-430 | ≥35 |
|
| ≥21 | 85-115 |
| 43-57 | 95-125 | ||||
| Y2 | 1/2H | H02 | R410/H120 | 355-460 | 355-440 | 395-460 | 410-490 | ≥25 | ≥28 |
| ≥9 | 100-130 | 85-145 | 56-66 | 120-155 | ||||
| Y | H | H04 | R480/H150 | 410-540 | 410-540 | 490-560 | ≥480 | ≥13 |
|
|
| 120-160 | 105-175 | 70-73 | ≥150 | ||||
| T | EH | H06 | 520-620 | 520-620 | 570-635 | ≥4 |
|
| 150-190 | 145-195 | 74-76 | ||||||||
| TY | SH | H08 | ≥570 | 570-670 | 625-690 |
|
|
| ≥180 | 165-215 | 76-78 | ||||||||
| H68 | C2620 | C26200 | CUZn33 | M | / | / | R280/H055 | ≥290 | / | / | 280-380 | ≥40 | / | / | ≥40 | ≤90 | / | / | 50-90 |
| Y4 | R350/H095 | 325-410 | 350-430 | ≥35 | ≥23 | 85-115 | 90-125 | ||||||||||||
| Y2 |
| 355-460 |
| ≥25 |
| 100-130 |
| ||||||||||||
| Y | R420/H125 | 410-540 | 420-500 | ≥13 | ≥6 | 120-160 | 125-155 | ||||||||||||
| T | R500/H155 | 520-620 | ≥500 | ≥4 |
| 150-190 | ≥155 | ||||||||||||
| TY | ≥570 |
| ≥180 |
| |||||||||||||||
| H65 | C2700 | C27000 | CUZn36 | M | O |
| R300/H055 | ≥290 | ≥275 |
| 300-370 | ≥40 | ≥40 |
| ≥38 | ≤90 |
|
| 55-95 |
| Y4 | 1/4H | H01 | R350/H095 | 325-410 | 325-410 | 340-405 | 350-440 | ≥35 | ≥35 |
| ≥19 | 85-115 | 75-125 | 43-57 | 95-125 | ||||
| Y2 | 1/2H | H02 | R410/H120 | 355-460 | 355-440 | 380-450 | 410-490 | ≥25 | ≥28 |
| ≥8 | 100-130 | 85-145 | 54-64 | 120-155 | ||||
| Y | H | H04 | R480/H150 | 410-540 | 410-540 | 470-540 | 480-560 | ≥13 |
|
| ≥3 | 120-160 | 105-175 | 68-72 | 150-180 | ||||
| T | EH | H06 | R550/H170 | 520-620 | 520-620 | 545-615 | ≥550 | ≥4 |
|
| 150-190 | 145-195 | 73-75 | ≥170 | |||||
| TY | SH | H08 | ≥585 | 570-670 | 595-655 |
|
|
| ≥180 | 165-215 | 75-77 | ||||||||
